Skip to main content

Power over Ethernet (PoE) Adapter Installation

Power an IAQ or Node with the Attune PoE Power Adapter

N
Written by Nick Ahern
Updated over 2 weeks ago

The Attune Power over Ethernet (PoE) Adapter is used to power your Attune IAQ or Node via active or passive PoE. PoE is low voltage and can be easily run to installation locations. The PoE Adapter is paired with the Attune Mounting Backplate for installation on a junction box to help create a seamless look.


Installation

Attach the PoE Adapter to the rear of your IAQ or Node via the connectors highlighted in Red below

Insert the PoE cable into the port on the adapter. Note that the cable is inserted into the topside of the adapter (image shows Attune Mounting Plate).

To complete installation, following the Attune Mounting Backplate guide to attach your IAQ or Node to the junction box.

Did this answer your question?