The Attune Power Low Voltage Power Adapter is used to power your Attune IAQ or Node via 12 to 24VAC or VDC. Low voltage can be easily run to installation locations than standard 120VAC which can bring down installation costs. The Low Voltage Power Adapter is paired with the Attune Mounting Backplate for installation on a junction box to help create a seamless look.
Installation
Attach the PoE Adapter to the rear of your IAQ or Node via the connectors highlighted in Red below
Connect the low voltage cables to the ports on the adapter. The polarity of the wires does not matter (image shows Attune Mounting Plate).
To complete installation, following the Attune Mounting Backplate guide to attach your IAQ or Node to the junction box.